Which Written Safety Programs Does OSHA Require for Manufacturers?

Most manufacturers need at least a written Hazard Communication program, a Lockout/Tagout (energy control) program with documented procedures, a certified PPE hazard assessment, and Emergency Action and Fire Prevention plans. Others become mandatory once a specific hazard is present: respirators, permit-required confined spaces, occupational exposure to blood, or highly hazardous chemicals above threshold amounts. Which ones apply depends on your operations, not your industry label.

Here's the checklist, with the standard behind each.

Required in almost every manufacturing plant

Written program OSHA standard When it's required
Hazard Communication program 29 CFR 1910.1200(e) Employees can be exposed to hazardous chemicals, which covers almost every plant. Must cover labels, safety data sheets, training, and a chemical inventory.
Lockout/Tagout (energy control) program and procedures 29 CFR 1910.147(c) Employees service or maintain machines where unexpected start-up or energy release could cause injury. Machine-specific procedures must be documented.
PPE hazard assessment certification 29 CFR 1910.132(d)(2) Always: you must assess the workplace for hazards requiring PPE and certify the assessment in writing.
Emergency Action Plan 29 CFR 1910.38 Whenever another OSHA standard requires one (common in manufacturing). Must be written if you have more than 10 employees.
Fire Prevention Plan 29 CFR 1910.39 Whenever another OSHA standard requires one. Must be written if you have more than 10 employees.
Bloodborne Pathogens Exposure Control Plan 29 CFR 1910.1030(c) Employees have occupational exposure to blood or other potentially infectious materials, including designated first-aid responders.

Required when the hazard is present

Written program OSHA standard When it's required
Respiratory Protection program 29 CFR 1910.134(c) Respirators are necessary to protect health, or the employer requires them.
Permit-Required Confined Space program 29 CFR 1910.146(c)(4) Employees will enter permit-required confined spaces (tanks, pits, silos, vessels).
Process Safety Management 29 CFR 1910.119 Processes involve highly hazardous chemicals at or above threshold quantities.

Records and documented programs to have ready

  • Hearing conservation (29 CFR 1910.95): required when noise exposures reach an 8-hour time-weighted average of 85 dBA, with monitoring, audiometric testing and records.
  • Powered industrial truck (forklift) training certification (29 CFR 1910.178(l)(6)): written certification that each operator was trained and evaluated, with re-evaluation at least every three years.
  • Injury and illness recordkeeping (29 CFR 1904): OSHA 300, 300A, and 301 forms for most employers with more than 10 employees. Post the 300A summary from February 1 to April 30.
  • Electrical safety-related work practices (29 CFR 1910.331–.335): OSHA doesn't spell out a single "written program," but an electrical safety program aligned with NFPA 70E is the accepted way to show compliance.

Watch out for state plans

Many states run OSHA-approved state plans. They adopt the federal standards and can add their own requirements or interpretations, so check your state's rules as well.

A written program isn't the finish line

The most common citation pattern isn't a missing program. It's a program that doesn't match reality: lockout procedures for machines that were replaced, a Hazard Communication inventory that's three years old, a respirator program with no fit-test records. Write each program for your hazards, assign an owner, train on it, and audit it. That's what turns a document into a working safety program.

Frequently asked questions

What's the most-cited OSHA standard in manufacturing?
Lockout/Tagout and Hazard Communication are consistently among OSHA's most frequently cited standards, so they're the first two programs to get right.

Can I use a template for my written programs?
Yes, as a starting point. OSHA expects the program to reflect your actual workplace: your chemicals, your machines, your people. An uncustomized template can create as much exposure as having no program.

How often should written safety programs be reviewed?
At least annually, and whenever equipment, processes, or chemicals change; some standards set specific review intervals, such as the periodic inspection of energy control procedures required at least annually under 1910.147(c)(6).

Do I need a safety professional to write these programs?
No, but you need someone who understands the standards and your operations. Many manufacturers assign it to HR or operations staff. The Safety Program Accelerator teaches those people how to build every program each company needs.


Get every required program written, fast. The Safety Program Accelerator includes fillable written-program templates and two full modules on written safety programs, with live weekly Q&A from Bobbi K. Samples, CSP. Graduates earn the CSPA designation. Check the next cohort start date on the Safety Program Accelerator page.

Previous
Previous

Safety Consultant vs. Building It In-House: What Does It Really Cost?

Next
Next

Best Online Workplace Safety Training Courses (2026): Compare Compliance, Skills & Program Design